| Customization: | Available |
|---|---|
| Electricity Type: | DC |
| Number of Pole: | 1 |
|
Still deciding? Get samples of US$ 22.00/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ASW200 12VDC 200A Use For Electirc Vehicles And Engineering
machinery AOKAI DC Contactor
|
Brand: AK/AOKAI
Name: DC Contactor
Model: ASW200-1Z/SW180
Rated Voltage: DC12/24/48V
Rated Current: 200A
Dimension: 62*45.5*123(mm)
Weight: About 730g |
|
SPECIFICATIONS
| Coil Rated Voltage | DC12V, 24V, 36V, 48V.etc. |
| Main Circuit Rated Current (A) | 200A |
| Main Circuit Contact Voltage Drop Of (load:100A) |
≤80mV |
| Under (20±5), Cooling Pull-in Voltage | ≥70% |
| Under (20±5), Cooling Release Voltage | ≥5%, ≤40% |
| Acceptable Fluctuation Range of Coil Voltage | ±20% |
| drop-out time | ≤30ms |
| pull-in time | ≤20ms |
| The Max Disconnecting Time of Contacts | ≤5ms |
| Insulation Resistance | ≥50MΩ |
| Dielectric Strength | 50Hz/60Hz 1000VAC/1min |
| Overload Current | ≤7Ie, ≤1s |
| Coil Consumption (W) | ≤12.0W |
| Electrical Life | 20000 times |
| Mechenical Life | 300 Thousand times |
| Working Mode | Continuous or intermittent |
| Contacts Type | 2 NO and 2 NC |
| Contact Material | AgCdO / AgCuO |
| Auxiliary Contact Rated Load (Optional Parts) | 2A/48VDC, 5A/24VDC |
| Technical Standard | GB14048.4-2010 |
USAGE ENVIRONMENT
| Altitude | ≤2Km | Amblent temperature | -25~+55 |
| International protection | IP50 | Installation type | III |
| Way to install | Any | Vibration | 2.5g(5~50)Hz |
| Impact | 50g,11ms(Half-sine wave) |
SCHEMATIC DIAGRAM
INSTALLATION DIAGRAM
){kind=link}