| Customization: | Available |
|---|---|
| Electricity Type: | DC |
| Number of Pole: | 1 |
|
Still deciding? Get samples of US$ 18/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Motor Forklift Electromobile Gab Vehicle Car Winch Use SW80 DC 100A NO NC Magnetic Latching Electromagnetic Contactor
This product have one normally open or one normally closed contact. It is usually used in electric vehicles, telecommunication equipment, engineering machinery, car batteries,electric forklift trucks,trains,ships,electronic control systems such as UPS .
|
Brand: AK/AOKAI
Name: DC Contactor
Model: ASW100/SW80
Rated Voltage: DC24
Rated Current: 100A
Dimension: 33*36*88(mm)
Weight: About 200g |
 |
1. SPECIFICATION
| Coil Rated Voltage | DC12V, 24V, 36V, 48V.etc. |
| Main Circuit Rated Current (A) | 100A |
| Main Circuit Contact Voltage Drop Of (load:100A) |
less thanmV |
| Under (20±5), Cooling Pull-in Voltage | less than70% |
| Under (20±5), Cooling Release Voltage | ≥5%, ≤40% |
| Acceptable Fluctuation Range of Coil Voltage | ±20% |
| drop-out time | ≤30ms |
| pull-in time | ≤20ms |
| The Max Disconnecting Time of Contacts | ≤5ms |
| Insulation Resistance | ≥50MΩ |
| Dielectric Strength | 50Hz/60Hz 1000VAC/1min |
| Overload Current | ≤7Ie, ≤1s |
| Coil Consumption (W) | ≤8.5W |
| Electrical Life | 20000 times |
| Mechenical Life | 300 Thousand times |
| Working Mode | Continuous or intermittent |
| Contacts Type | 1 NO and1 NC |
| Contact Material | AgCdO / AgCuO |
| Auxiliary Contact Rated Load (Optional Parts) | 2A/48VDC, 5A/24VDC |
| Technical Standard | GB14048.4-2010 |
2. USAGE ENVIRONMENT
| Altitude | ≤2Km | Amblent temperature | -25~+55 |
| International protection | IP50 | Installation type | III |
| Way to install | Any | Vibration | 2.5g(5~50)Hz |
| Impact | 50g,11ms(Half-sine wave) |
SCHEMATIC DIAGRAM
INSTALLATION DIAGRAM
){kind=link}